J107 Production introduction
J107 Basic information
Each plate contains two parts:
Metal plate--- It is an important heat transfer element for
pressing metal sheet with corrugation, sealing groove and corner
hole.
Corrugated not only can strengthen heat transfer, and can increase
the sheet and rigid, so as to improve the bearing capacity of the
plate heat exchanger, and because turbulence prompted the liquid
state, so it can reduce the formation of sediment or dirt, play a
role in “self-cleaning”.
Sealing gasket--- Installed in the slots along the perimeter of the
plate of the gasket and seal plate between the peripheral, prevent
fluid leak outward, and according to the requirements of design,
the sealing part of the Angle of hole, the cold and hot liquids
according to their respective port flow.
Material: Stainless steel 304, Stainless steel 316L, Titanium
Advantage: Produce plastic deformation and have certain strength
J107 Feature
- Advanced plate design to improve heat transfer efficiency.
- Uniform distribution of fluid, accurate positioning.
- Common types of plate heat exchanger plates at home and abroad.
- Reasonable shunt area, enhance corrosion resistance, improve the
utilization rate of heat exchanger area.
- The reverse flow of the two fluids greatly improves the heat
exchanger efficiency.
- Parallel piping of the same fluid inlet and outlet simplifies
engineering installation.
- Single plate, simplified maintenance.
Parameters
| Plate Material | Available Medium |
| AISI304,AISI316L | Pure Water, Fresh Water, Mineral Water |
| Titanium | Sea Water, Mineral Oil, Vegetable Water |
| 254SMO | Dulute Sulphuric Acid etc |
| Nickel | Caustic Soda with high temperature and concentraction |
| Hastelloy | Concentration sulphuric acid etc |
Why Choose Us?
We seek an understanding of the working conditions for you, and
carries on the effective communication with your engineer, to make
a perfect solution, It will be more accurate, reducing purchase
cost and energy consumption (Water, Electricity and Gas).
Our technical engineers can according to user’s working conditions,
for our customers to provide professional selection plan and
drawings, and we will choose the appropriate solutions, to provide
a stable, efficient service for you.
We will give more cosideration to customers’s working conditions in
order to reduce their equipment purchasing cost and energy
consumption of processing operations (Water, Electricity and Gas).
