GC16 Basic information of PHE plate
Each plate contains two parts
Metal plate:It is an important heat transfer element for pressing
metal sheet with corrugation, sealing groove and corner hole.
Corrugated not only can strengthen heat transfer, and can increase
the sheet and rigid, so as to improve the bearing capacity of the
plate heat exchanger, and because turbulence prompted the liquid
state, so it can reduce the formation of sediment or dirt, play a
role in "self-cleaning".
Sealing gasket: installed in the slots along the perimeter of the
plate of the gasket and seal plate between the peripheral, prevent
fluid leak outward, and according to the requirements of design,
the sealing part of the Angle of hole, the cold and hot liquids
according to their respective port flow.
GC16 Sealing principle
The corrugated plate is pasted with sealing gasket, which is
designed to double seal structure and has signal hole.When the
medium leaks from the first seal, it can leak out from the signal
hole, and the problem can be detected and solved as soon as
possible, without causing the mixing of the two media.Sealing
gasket according to different media and operating temperature to
choose different types of rubber.
Brand Name: M&C
Material: Stainless Steel 316L, Stainless Steel 304, Titanium
Advantage: Produce plastic deformation and have certain strength
Dimension: 1415*496mm
Center of hole distance: 1238*310mm
Corrugation deep: 3mm
Feature
1. Advanced plate design to improve heat transfer efficiency.
2. Uniform distribution of fluid, accurate positioning.
3. Common types of plate heat exchanger plates at home and abroad.
4. Reasonable shunt area, enhance corrosion resistance, improve the
utilization rate of heat exchange area.
5. The reverse flow of the two fluids greatly improves the heat
exchange efficiency.
6. Parallel piping of the same fluid inlet and outlet simplifies
engineering installation.
7. Single plate, simplified maintenance.
GC16 Parameters
| Plate Material | Available Medium |
| AISI304, AISI316L | Pure Water, Fresh Water, Mineral Water |
| Titanium | Sea Water, Mineral Oil, Vegetable Water |
| 254SMO | Dulute Sulphuric Acid etc. |
| Ni | Caustic Soda with high temperature and concentraction |
| Hastelloy | Concentration Sulphuric Acid etc. |
Application area
Application:HAVC, Powerplant, Food, Marine, Refinery, Pharmace,
Mining, Chemical, Refrigeration
