TL90PP Plate Frame Heat Exchanger SS304 SS316 Gasketed Heat
Exchanger
TL90PP Basic information of PHE plate
Metal plate:It is an important heat transfer element for pressing
metal sheet with corrugation, sealing groove and corner hole.
Corrugated not only can strengthen heat transfer, and can increase
the sheet and rigid, so as to improve the bearing capacity of the
plate heat exchanger, and because turbulence prompted the liquid
state, so it can reduce the formation of sediment or dirt, play a
role in "self-cleaning".
Sealing gasket: installed in the slots along the perimeter of the
plate of the gasket and seal plate between the peripheral, prevent
fluid leak outward, and according to the requirements of design,
the sealing part of the Angle of hole, the cold and hot liquids
according to their respective port flow.
TL90PP Parameters
| Plate Material | Available Medium |
| AISI304, AISI316L | Pure Water, Fresh Water, Mineral Water |
| Titanium | Sea Water, Mineral Oil, Vegetable Water |
| 254SMO | Dulute Sulphuric Acid etc. |
| Ni | Caustic Soda with high temperature and concentraction |
| Hastelloy | Concentration Sulphuric Acid etc.
|
Feature
1.Advanced plate design to improve heat transfer efficiency.
2.Uniform distribution of fluid, accurate positioning.
3.Common types of plate heat exchanger plates at home and abroad.
4.Reasonable shunt area, enhance corrosion resistance, improve the
utilization rate of heat exchange area.
5.The reverse flow of the two fluids greatly improves the heat
exchange efficiency.
6.Parallel piping of the same fluid inlet and outlet simplifies
engineering installation.
7.Single plate, simplified maintenance.
PHE Principle
Flat plate heat exchanger is a type of heat exchanger that uses
metal plates to transfer heat between two fluids.This has a major
advantage over a conventional heat exchanger in that the fluids are
exposed to a much larger surface area because the fluids spread out
over the plates. This facilitates the transfer of heat, and greatly
increases the speed of the temperature change. Plate heat
exchangers are now common and very small brazed versions are used
in the hot-water sections of millions of combination boilers. This
high heat transfer efficiency for such a small physical size has
increased the domestic hot water(DHW) flow rate of combination
boilers. The small plate heat exchanger has made a great impact in
domestic heating and hot-water.Larger commercial versions use
gaskets between the plates.
Packing & Delivery
Packing Details : Standard Export Plywood & Carton.
Delivery Details : 3-30 days after order of Solid bicycle tire
tubes.
